The parameters listed below were removed in the respective eTASK version and are therefore no longer available.
Release 2025.2
ACTIVATEETASK1ONLOGIN
Determines whether an eTASK 1.0 session is started simultaneously with login to the FM Portal to avoid intermediate logins when an eTASK 1.0 application is called up in the FM Portal. 1 = eTASK 1.0 session is started 0 = eTASK 1.0 session is not started
CRYSTALREPORTCOMPANYLOGOPATH
Optional specification of the path to the company logo. If this path is specified, some Crystal Reports reports specifically configured for this purpose retrieve the company logo via this path and then display the logo. The path must be specified relative to the "App.Etask" folder. Example: /neon/Cfg.Etask/pics/CR_logo.png
CRYSTALREPORTFOLDER
Folder in the FM Portal installation directory where the reports are stored, usually ~/RPTFiles/. Note: If a report with the same name is located in both the neon/Cfg.Etask/RPTFiles folder and the neon/App.Etask/RPTFiles folder, the report is retrieved from the Cfg.Etask folder.
PSTRAININGSENDMAILS
Determines whether emails for the workflow are sent by eTASK Training Management or not. 1 = Emails are sent 0 = Emails are not sent
DRIVER_LICENSE_MONTHS
Interval at which the validity of all drivers’ driver’s licenses is checked. Example: “6” for a check every 6 months. Default: “0”
Booking: Show Staff / Cost Center Selection
eTASK.SmartReservation eTASK.QuickBooking eTASK.SmartReservation Determines whether the sections for personnel and cost center selection should be displayed expanded in the various booking paths. Checkbox selected = In the wizard, the sections for participants and billing information are expanded (default) Checkbox not selected = The sections are collapsed
Booking: RVA may always cancel
eTASK.Catering Room Service eTASK.SmartReservation eTASK.Quick Booking Determines whether room managers can cancel room bookings without regard to any cancellation deadlines, or modify bookings without regard to booking deadlines, or shorten upcoming events. Note: Cancellation deadlines as well as lead and lag times for any beverage bookings must be observed. Checkbox selected = The actions described above are possible Checkbox not selected = The actions described above are not possible
Booking: Time Interval
eTASK.Catering Room Service eTASK.SmartReservation eTASK.Quick Booking Determines the time increments in which times can be selected in the booking wizard. Specified in minutes.
PUBLIC HOLIDAYS
Specify here whether holidays should be taken into account for the various booking methods.
VISUALIZERSEARCHIMAGE
Path to the icon used to access drawings via forms.
URLSECTIONCONFIG
Path to SectionConfig in Design Mode. Since Design Mode is no longer in use, this configuration parameter no longer has any effect.
URLETASK1DISPATCHER
URL to the dispatcher that sets the eTASK 1.0 session.
TIMEFORMAT
This parameter defines the time format. The default value is ""HH:mm". Note: This parameter cannot be changed by customers.
DATETIMEFORMAT
Defines the date-time format. The default is: dd.MM.yyyy HH:mm.
SYSTEMFIELDSETCLASS
This parameter uses only the default value, which must not be changed.
SMTPBODYHTML
Determines whether the emails sent by the FM Portal contain HTML code. 1 = Emails are sent as HTML emails 0 = Emails are sent as text emails
SHOWAPERTURELOGINONLOGIN
Determines whether a link to the Aperture login is displayed on the login page. 1 = Link is displayed 0 = Link is not displayed
MYSERVICESTANDARDGROUP
Name of the permissions group that receives all eTASK.Service tickets not explicitly assigned by the user to another group. Permissions groups are managed under Control Panel / Portal Options / Groups and Permissions.
ENABLEDOMAINSELFSERVICE
Determines whether self-registration is enabled or not. 1 = Self-registration enabled 0 = Self-registration disabled
DEFAULT_SERVICELIST_WORKFLOW_TYPE
Specifies the workflow for displaying tickets when the service list is called up. If this workflow is not active, the first active workflow is used. Enter the workflow code from the workflow table (Control Panel - MyFM - Configuration Services/Workflows - Workflows).
REGEXP.ROOMDELIMITER
Determines which character is recognized as a delimiter for location, building, floor, and room codes in room filters in regular expressions.
EXCLUSIVEROOMIMAGE
Path to the image that marks exclusive rooms in the Meeting Room Wizard.
REVISIONNUMBER
Portal version
REQUIRECLASS
This parameter uses only the default value, which must not be changed.
PRJCFGUSEBUFFER
Determines whether the configuration parameters are cached in the FM Portal. This can improve the performance of the FM Portal. 1 = Configuration parameters are cached 0 = Configuration parameters are not cached
PRJCFGSAVEONEND
Determines whether cached configuration parameters are written back to the database when the FM Portal is stopped, to ensure that changes are not deleted by the shutdown. 1 = Parameters are written back to the database 0 = Parameters are not written back to the database
PAGESIZE
Default size of grid pages (search); number of grid rows - Although PAGESIZE is used in the code, it is always overridden by TableConfig parameters
ODDROWCLASS
This parameter uses only the default value, which must not be changed.
OBJEKTTYPCODEUSEHIERARCHY
Enter 1 for hierarchy codes, enter 0 for codes without a hierarchy.
MONEYSYMBOL
Determines the currency in which amounts are displayed. By default, the currency is set to Euro.
LABELCLASS
Only the default value is used for this parameter. The default value must not be changed.
FEEDENABLED
Determines whether the "News" button is displayed in the system tray or not. 0 = Button is not displayed 1 = Button is displayed
FAVORITESADDIMAGE
Path to the image displayed in the Meeting Room Wizard for adding meeting rooms to the favorites list.
EXTMSGTARGETCLASS
This parameter uses only the default value, which must not be changed.
CRYSTALREPORTVERSIONTEXT
This parameter determines the text in reports that can be inserted into reports in Crystal Reports to indicate which version of the report is available.
EVENROWCLASS
This parameter uses only the default value, which must not be changed.
DATEFORMAT
Defines the date format in the portal. The default is: dd.MM.yyyy.
CREATEBARCODEDEBUGFILES
This configuration parameter is a setting in Zebra Designer Plus. It specifies whether the input parameters are logged during barcode printing or not. The input parameters are saved in a TXT file and are used to verify whether all required information can be transmitted to Zebra Designer Plus. 1 = Input parameters are logged 0 = Input parameters are not logged
CONNECTOR_PATH
Path where the JAR files of the connectors are stored. This is used to connect the endpoints of the connectors.
CHECKLICENSE
Enables or disables the check to verify whether a license is available for the called functions. 1 = Check licenses 0 = Do not check licenses
LOGO_URL
URL that is opened in a new browser tab when the logo is clicked to the right below the system bar. If the entry is empty (enter “[EMPTY]”), no link is set to the logo.
PORTALFAXNUMBER
Fax number of the FM portal. Documents can be scanned to the FM portal’s document inbox using this number.
USECLIENTTIMEZONEOFFSET
If the time zone set in the logged-in user’s profile differs by more than 15 minutes from the FM portal’s time zone, the FM portal may display a message informing the user of this after login. 1 = The message is displayed 0 = The message is not displayed
CACHECONFIGURATIONS
Determines whether the configuration of tables, info areas, and fields is cached. Enabling this significantly improves the performance of the FM Portal. 1 = Configuration is cached 0 = Configuration is not cached.
DEFAULTESTATELINKNODE
This text is used to construct the path to a form when a record is accessed via the Property Explorer. This parameter uses only the default value, which must not be changed.
DEFAULTESTATEVISUALLINKNODE
This text is used to construct the path to a drawing when it is accessed via the Property Explorer. This parameter uses only the default value, which must not be changed.
Order Type
eTASK.Catering-Room-Service eTASK.SmartReservation Sets the order type for the beverage room service 2 = TYP-CB (Beverage types can be selected via checkboxes) 5 = GTR-MG (drinks can be ordered by specifying quantities) 7 = GTR-MG-GDK (drinks can be ordered by specifying quantities in the assigned place setting)
CONNECTOR_PROPERTIES
The PROPERTIES file that the connector uses to log in to the system environment must be entered here. The pointer after the hyphen determines which environment is used: e.g., k03-test.properties for the test environment or k03-prod.properties for the production environment
FAVORITESIMAGEADD
Path to the image used as the icon for adding tables to favorites.
FAVORITESIMAGEREMOVE
Path to the image used as the icon for removing tables from favorites.
FAVORITESREMOVEIMAGE
Path to the image displayed in the Meeting Room Wizard for removing meeting rooms from the favorites list.
SHOWCHANGEPASSWORDLINKS
This parameter determines whether the links to change and reset a password are displayed on the login page. 1 = Links are displayed 0 = Links are not displayed The default value is 0.
SHOWFIRSTSTEPSPDFONLOGIN
This parameter determines whether a link to the PDF document "Getting Started with the FM Portal" is displayed on the login page. 1 = Link is displayed 0 = Link is not displayed The default value is 0.